Owners Manual

Congratulations on your new Ultimate Airball® tubeless Paintball Bunker System.

• ALWAYS ensure that all Players, Spectators, and Judges ALWAYS wear ASTM compliant Mask & Goggle systems, made specifically for Paintball.
• ALWAYS adjust all Paintball markers to shoot at velocities below 280 feet per second,
• ALWAYS Use a chronograph to measure the paintball’s speed.
• ALWAYS follow National, State, Provincial, and Local laws and zoning ordinances.

Ultimate Airball® Bunker Setup

1. Remove bunkers from storage bags and unroll.
2. Locate the Fill/Release valve on each bunker.
3. Once the valve is located, turn the cover cap counter-clockwise, and pull it towards you about an inch (2.5 cm). The cover cap can hang free on it’s tether.
4. Inside the Fill/Release Valve port, gently push in the center pin about ¼ inch (1 cm) to open it, and turn it clockwise to lock the valve open.
5. Unpack the leaf blower and follow the instructions. Turn on the leaf blower and place the end of the nozzle over the open valve to inflate. You do not need to make a seal: Aiming the air outlet within two or three inches (5-6 cm) is close enough.
6. DO NOT OVER INFLATE !!! Bunkers work best when slightly under-inflated or soft, so that they will absorb paintball hits instead of bouncing them away.
   
   Leave the bunkers soft enough so that a gentle push with your hand against the bunker will allow your hand to move 5 - 8 inches (12 – 20 cm) into the bunker. If the air temperature increases during the day, be prepared to release air to regain “soft” condition.
7. Once the bunker is inflated, close the valve pin by rotating it counter clockwise until it pops towards you, snapping closed.
   Then replace the valve cover by inserting it into the hole and rotating it clockwise ¼ turn.
   Place the Bunker in the desired location on the field. Before anchoring the bunker to the ground make sure the valve is facing away from the opposing flag station. This way the valve will not be shot, and will remain clean and free of debris.
8. Once the bunker is placed correctly on the field, anchor the bunkers with the stakes that are provided, using a hammer. Always wear Safety Glasses when using a hammer! Make sure the elastic cord is not “tight”, and remains flush against the ground.
9. Hammer stakes ALL THE WAY INTO THE GROUND! Be sure stakes are hammered far into the ground so that the head of the stake is BELOW GROUND LEVEL!!

Repairing Accidental Damage

To repair an accidental puncture, use the included patch kit and follow these simple steps:

1. Clean the area around the leak with soap and water.
2. Let dry completely.
3. Cut a patch from the extra material, (included) about twice the size of the hole.
4. Apply glue (included) to both the patch and around the hole. Before putting the patch over the hole, let the glue dry until it is tacky, (about 2 or 3 minutes).
5. Apply patch to the hole, rubbing the bubbles out. Hold in place for about 30 seconds.

Clean Up & Storage

Use mild soap and water to clean the bunkers. It is easiest to clean them when they are inflated. AIR dry.

To deflate, simply open the valve and allow Bunker to deflate.
Once the air is out of the bunker, roll it up with the valve open and place in the storage bags.
If available use a shop-vac in reverse to remove the excess air from the bunker.

Copyright BrimStone Enterprises, 2001

 

Manufacturer’s Limited Warranty:

The product, “Ultimate AirBall™” inflatable bunker system (“Product”), is manufactured by Brimstone Enterprises, Inc., (“Manufacturer”), 1817 Jenkins Alban Rd., Oak Hill, OH 45656 USA. The Manufacturer hereby makes the following Express Limited Warranty to the original purchaser, on the terms and conditions set forth below:

1. Eligibility: Only the original purchaser or it’s authorized agent shall be eligible for benefits under this express limited warranty.
   
   
2. Coverage: Any damaged portion of the Product will be repaired or replaced, free of charge, by the Manufacturer, or the full purchase price of the product refunded at the time of it’s complete return in accordance with the obligations set forth in this Express Limited Warranty, for a period of up to and including (1) one year from the date of purchase for any damage to the product caused by material defect, material breakdown, or other damage resulting from a manufacturing defect, provided the product has been properly erected, inflated, and maintained, in accordance with owners manual and proper setup and inflation instructions, as provided by the Manufacturer.
   
   
3. Purchaser’s Obligations: In order to recover under this warranty, purchaser shall:
   
   a) Always properly set-up, anchor, inflate, and maintain the Product in accordance with the instructions of the Manufacturer.
   b) Within thirty (30) days of the appearance of any damage of the product, mail notification of such damage to:
   
   Brimstone Enterprises, Inc., 1817 Jenkins Alban Rd., Oak Hill, OH 45656 USA.
   The notification shall include the following information:
   
   1) Date of Purchase.
   2) Name, Address, Telephone number of Purchaser.
   3) A copy of the bill of sale or invoice.
   4) Clear photographs of the Product in it’s damaged state.
   5) A statement by the Purchaser of the damage to the product, the exact symptoms, and the cause of the damage.
   
   c) Allow the Manufacturer to inspect the Product in it’s damaged state, as set-up by the purchaser.
   d) Receive an official Return Authorization (R.A.#) Number before shipping. R.A. # Must appear on the returned package. NO “Freight Collect” shipments will be accepted.
   e) Be responsible for all shipping and handling charges relating to product returned and/or replaced under this Express Limited Warranty, except that the Manufacturer shall be responsible for 50% of the usual, reasonable and necessary shipping charges incurred by the Purchaser in the return of the goods to the manufacturer.
   
   
4. LIMITATIONS OF WARRANTY, LIABILITY, AND DAMAGES: The foregoing Express Limited Warranty is in lieu of all other Warranties, including any implied warranty of merchantability and any implied warranty of fitness for a particular purpose, which are hereby disclaimed by the manufacturer. To the extent any State does not allow the disclaimer of an implied Warranty of merchantability or the implied Warranty for fitness for a particular purpose, any such Warranties are hereby limited in duration to the above Warranty Period for the Express Limited Warranty given herein. The Manufacturer shall not be subject to any other Liabilities or obligations whatsoever with respect to this Product. Under no circumstances shall the Manufacturer be liable for any consequential or other damages, expenses, injuries, losses, or delays, however caused. The right to the repair or replacement of the Product, or return for refund of the purchase price, as provided in this Warranty, shall constitute the sole and exclusive remedy of the Purchaser. No representative of the Manufacturer has the authority to make or imply any representation, promise, or agreement which in any way varies the terms of this Express Limited Warranty.

Brimstone Enterprises, Inc. 1817 Jenkins Alban Rd., Oak Hill, OH 45656 USA.
Tel: 740.682.6232